Assessment of compliance of dimensional tolerances in concrete slabs using TLS data and the 2D continuous wavelet transform

While several concrete waviness assessment methods are being developed to overcome the disadvantages of one assessment method over the other, the sparseness of measurements associated with each method prevents from achieving a better understanding of how elevations and undulations change across the surface. Assessing waviness over multiple one-dimensional (1D)-survey lines may not accurately reflect the actual condition or waviness of the entire floor. The methodology presented in this paper presents a compliance-checking algorithm for detecting elements where dimensions exceed specified tolerance. It also enables assessment of a concrete surface in two-dimensional (2D) domain using the synergy of Terrestrial Laser Scanning (TLS) and Continuous Wavelet Transform (CWT). 2D CWT analysis provides information not only about the periods of the surface undulation, but also the location of such undulations. The validity of the methodology is established by running a test on point clouds obtained from a warehouse project near Gresham, Oregon. A rigorous comparison between one of the existing floor waviness measurement methods, the waviness index method, and the proposed method is made. The results showed that the proposed methodology delivers accurate results that enable the localization of surface undulations of various characteristic periods. Furthermore, the proposed method is more efficient in terms of time taken for acquiring the measurements, and is, thus, more cost efficient.