کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6699776 502535 2015 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Modeling and measurement study on an intermittent heating system of a residence in Cambridgeshire
ترجمه فارسی عنوان
مطالعه مدلسازی و اندازه گیری بر روی یک سیستم حرارت متناوب اقامت در کمبریجشایر
کلمات کلیدی
حرارت متناوب، ثابت زمان حرارت، میزان صرفه جویی در انرژی، راحتی حرارتی، مدل سازی تحلیلی، اندازه گیری سایت،
ترجمه چکیده
حرارت متناوب در نظر گرفته شده است که قادر به دستیابی به یک میزان صرفه جویی در انرژی بالا نسبت به گرمایش پیوسته است. این مقاله یک مدل پارامترهای دو مرحله ای توزیع شده برای مطالعه فرایند پویای حرارتی حرارت متناوب ایجاد می کند. در همین حال، اندازه گیری در محل در محل اقامت در کمبریجشایر برای بررسی صحت مدل انجام شد. اندازه گیری در محل، مدل ما را ساخت می کند و نشان می دهد که سیستم گرمای متناوب ما اندازه گیری شده است، قادر به ایجاد راحتی در محیط حرارتی داخلی است. با این حال، صرفه جویی در انرژی صرفه جویی تنها در حدود 5٪ در مقایسه با سیستم گرمایش مداوم است، که قابل توجه نیست. هر دو مدل و اندازه گیری در محل نشان می دهد که تغییر دمای هوا در محیط داخلی پس از گرمایش بهبود یافته است، به دنبال قانون معادله و به تبع آن روند پویای حرارتی حرارت متناوب می تواند با زمان ثابت حرارتی مشخص شود. ثابت دمای حرارتی یک شاخص کلیدی گرمای متناوب است. ظرفیت حرارتی پایین و ضریب انتقال حرارت بالا منجر به ثابت بودن زمان حرارتی می شود. سیستم گرمای متناوب با زمان ثابت ثابت حرارتی می تواند سرعت دمای داخلی را افزایش داده و دارای توان بالقوه صرفه جویی در انرژی باشد. مدت زمان حرارتی سیستم گرمای متناوب که مورد بررسی قرار گرفته است محاسبه شده است. در نهایت، پیشنهادات برای بهبود میزان صرفه جوئی در انرژی سیستم های گرمای متناوب در این مقاله ارائه شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
The intermittent heating is considered to be able to achieve a high energy saving rate compared with the continuous heating. This paper builds a two-stage lumped parameter model to study the thermal dynamic process of the intermittent heating. Meanwhile, the on-site measurement was carried out on a residence in Cambridgeshire to verify the correctness of the model. On-site measurement validates the model we build and shows that the intermittent heating system we measured is able to provide comfort indoor thermal environment. However, the associated energy saving rate is only about 5% compared with the continuous heating system, which is not significant. Both the model and the on-site measurement show that the temperature change of the indoor air after the heating was recovered follows the exponent law and accordingly the thermal dynamic process of intermittent heating can be characterized by the thermal time constant. The thermal time constant is found to be a key index of intermittent heating. Low thermal capacity and high heat transfer coefficient lead to a small thermal time constant. The intermittent heating system with small thermal constant time is able to elevate indoor temperature quickly and has large energy saving potential. The thermal time constant of the intermittent heating system we surveyed has been calculated. Lastly, suggestions for improving the energy saving rate of intermittent heating systems have been provided in this paper.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Building and Environment - Volume 92, October 2015, Pages 380-386
نویسندگان
, , ,