کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6702646 1428505 2018 62 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Deformation behavior of sandwich hemispherical structure under axial compression at low temperature
ترجمه فارسی عنوان
رفتار تغییر شکل ساختار نیمکره ای ساندویچ تحت فشرده سازی محوری در دمای پایین
کلمات کلیدی
ساختار نیم کره، ساندویچ، فشرده سازی، رفتار تغییر شکل دمای پایین،
ترجمه چکیده
ساختار ساندویچ هسته فوم دارای عایق عالی و قدرت خاص است و به طور گسترده ای در زمینه هوا فضا، هواپیما، ناوبری و نظامی استفاده می شود. پوسته نیم کره ای از این نوع ساختار ساندویچ به عنوان بخشی از انرژی و بار به دلیل توانایی جذب انرژی آن استفاده می شود. برخی از ساختارهای نیم ستونی ساندویچ فوم اصلی به ویژه در محیط های کم دمای پایین کار می کنند که تحت هر دو درجه حرارت و بارهای مکانیکی قرار می گیرند. تحقیق در مورد ظرفیت باربری این سازه ها در محیط بسیار کم دما برای طراحی و بررسی خواص آن ضروری است. در این مقاله خواص مکانیکی کم دما از ورق صورت و مواد هسته مورد آزمایش قرار گرفت. مدل عددی جابجایی حرارتی مکانیکی با مقایسه نتایج تجربی تأیید و تایید شد. از طریق شبیه سازی عددی، رفتار فشاری پوسته های نیم کره ای هسته فوم با اندازه های مختلف تحت شرایط مختلف بارگیری در دمای پایین بدست آمد. اثر بارگذاری درجه حرارت در حالت تغییر شکل، ظرفیت بار بارگذاری و انباشت تغییر شکل بیشتر مورد بررسی قرار می گیرد. پیشنهاد شده است که خنک کردن ورق ورقه ای یک روش بارگیری کم دما است. این همچنین مشاوره و ایده هایی برای استفاده از چنین ساختاری می دهد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Foam core sandwich structure has excellent insulation and specific strength and is widely used in the aerospace, aviation, navigation and military fields. The hemispherical shell of this kind sandwich structure is often used as energy and load carrying component due to its energy absorption ability. Some foam core sandwich hemispherical structures work in particular ultra-low temperature environments which undergo both temperature and mechanical loads. The research on the load carrying capacity of such structures in ultra-low temperature environment is essential for design and verify its properties. In this paper, the low-temperature mechanical properties of the face sheet and core materials were tested. The thermo-mechanical coupling numerical model was established and verified by comparison with the experimental results. Through the numerical simulation, the compressive behavior of the foam core hemispherical shells with different sizes was obtained under three different low-temperature loading situations. The effect of temperature loading on the deformation mode, load carrying capacity and deformation accumulation is further studied. It is suggested that the cooling of the out sheet is a relatively preferred low-temperature loading method. It also provides advice and ideas for the use of such structures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 203, 1 November 2018, Pages 267-277
نویسندگان
, , ,