کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6704053 | 1428518 | 2018 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterisation of wood plastic composite manufactured from kenaf fibre reinforced recycled-unused plastic blend
ترجمه فارسی عنوان
مشخصات کامپوزیت پلاستیکی چوب تولید شده از ترکیب پلی اتیلن پلی کربنات بازسازی شده و استفاده نشده
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترکیب پلیمر بازیافت شده، کامپوزیت چوب پلاستیک، فیبر طبیعی، ویژگی های مکانیکی، خواص مورفولوژیکی، خواص حرارتی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
This paper presents the development of wood plastic composite manufactured from recycled polypropylene/polyethylene (r-PP/PE) blend reinforced with kenaf fibre. The r-PP/PE were sourced from rejected-unused diapers, which the plastic and absorbent gel were separated. The composite was prepared by varying the fibre loadings, at 0, 30, 40, 50, and 60â¯wt%. The composite was tested for flexural and impact tests followed by thermal and morphological analyses. The thermal analysis was performed by using differential scanning calorimetry technique, while the scanning electron microscopy was used for morphological analysis. It was found that the maximum flexural strength of the composite was at 30â¯wt% of kenaf fibre, meanwhile the maximum modulus was at 60â¯wt%. SEM morphology showed the failure mode from the impact fractures such as voids, fibre breakage and matrix cracking. From thermal analysis, the addition of kenaf fibre reduced the degree of crystallinity of the r-PP/PE but an improvement can be observed after the second step of heating and cooling.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 189, 1 April 2018, Pages 510-515
Journal: Composite Structures - Volume 189, 1 April 2018, Pages 510-515
نویسندگان
M.J. Taufiq, Muhd Ridzuan Mansor, Zaleha Mustafa,