کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6706328 502915 2016 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Polymeric foams for cryogenic temperature application: Temperature range for non-recovery and brittle-fracture of microstructure
ترجمه فارسی عنوان
فوم پلیمری برای کاربرد دما در دمای: محدوده دما برای عدم بازیابی و شکست شکننده ریزساختار
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In the present study, low-temperature material characteristics of polyurethane foam, glass fiber-reinforced polyurethane foam, and polyisocyanurate foam were investigated. These foams are key candidate materials for use in membrane-type liquefied natural gas insulation systems. Liquefied natural gas insulation systems should be able to withstand severe environmental conditions, such as fluid induced impact loading under cryogenic temperatures. For the robust design of insulation system, both failure characteristics and deformation recovery capacity of the materials must be evaluated. Therefore, the failure characteristics and the deformation recovery ratio of the foams were investigated at various temperatures and strain rate levels. The present study revealed that the fracture behavior and the recovery ratio were significantly affected by decreases in temperature. As a newly obtained insight, it has been found that the recovery ratio for all tested materials significantly decreased at −163 °C. This finding is the opposite of the behavior that typically occurs at low temperatures. In particular, polyurethane foam specimen after experiment at the temperature of −163 °C was easily broken into pieces even under the application of small loads. In addition, it has been revealed that polyisocyanurate foam showed superior mechanical characteristics at cryogenic temperatures owing to the ring structure of isocyanurate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 136, February 2016, Pages 258-269
نویسندگان
, , , , , ,