کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6706686 502918 2015 61 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
General selection of lattice shape in ductile-reinforced brittle structures for increased stiffness
ترجمه فارسی عنوان
انتخاب عمومی شکل مشبک در سازه های شکننده تقویت کننده کوارتز برای افزایش سفتی
ترجمه چکیده
تقویت کننده های ارتودنسی در سازه های شکننده برای افزایش سفتی و قدرت کلی استفاده می شود. با این حال، هندسه شکل بهینه شبکه که بر اساس آن تقویت کننده های ورقه ای باید برداشته شود، به طور کلی مشخص نشده است. در این کار، یک ساختار شبکه ی ایزوتروپیک ورقه ای از یک سلول واحد ساخته شده و ماتریس شکننده ی یک پرایند است در فضاهای خالی بعد از آن. در شرایط تنش همگن، بخش شکننده همان استرس استرس از راه دور را تحت تاثیر قرار می دهد که از طریق شبکه های مجازی احساس می شود. تئوری آماری از شکست شکننده است که به ذهن متبادر می شود که سطح سلول واحد سلولی دلخواه است (برای یک مساحت کل داده شده) و از این رو هندسه شکل شکل شبکه بر احتمال زنده ماندن ساختار تاثیر نمی گذارد. بنابراین، یک شکل هندسی مناسب (مثلث یا مربع) ممکن است انتخاب شود که به طور کلی سفتی کلی را با احتمال احتمال زنده ماندن افزایش دهد. به این نتیجه رسیده ایم که یک شبکه (مثلثی) مثلثی در مقایسه با یک شبکه مربعی مناسب تر است اگر میله های شبکه تقویت کننده کویل سختی مشابه داشته باشند. این تکنیک و نتیجه گیری به طور کلی برای هر انتخاب مواد شکننده و مجذور درست است. همچنین این نتیجه برای هر دو بار فشاری و کششی درست است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Ductile reinforcements are used in brittle structures to increase the overall stiffness and strength. However, the optimum lattice shape geometry according to which the ductile reinforcements must be laid down, has not been generally established. In this work, a ductile isotropic lattice structure is constructed from a unit cell and the brittle matrix is “filled” in the empty spaces thereafter. In homogeneous stress conditions, the brittle part will experience the same applied remote stress as is felt by the ductile lattice. The statistical theory of brittle failure is invoked to bring home the point that the unit cell area of the lattice is arbitrary (for a given total area) and hence the lattice shape geometry does not influence the probability of survival of the structure. Therefore, a suitable geometry shape (triangle or square) maybe chosen to further enhance the overall stiffness at a given probability of survival. It has been concluded that an (equilateral) triangular lattice is better suited compared to a square lattice if the ductile reinforcement lattice bars have the same stiffness. The technique and conclusion is generally true for any choice of brittle and ductile materials. Also, the conclusion holds true for both compressive and tensile loading.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 131, 1 November 2015, Pages 325-332
نویسندگان
, ,