کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6706977 502926 2015 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Compressive and bending behaviours of wood-based two-dimensional lattice truss core sandwich structures
ترجمه فارسی عنوان
رفتارهای فشرده سازی و خمشی ساختارهای ساندویچ هسته ای تراس دو بعدی ساختمان چوب
ترجمه چکیده
در تلاش برای بهینه ساختار مواد مهندسی چوب، سازه های ساندویچ ساخته شده از چوب کامپوزیت و چوب کاج با دو بعدی چوب بر پایه چوب ساخته شده است با استفاده از یک شیار ساده و چسب باند روش. رفتارهای فشاری و خمشی بیرون از ساختار ساندویچ ساخته شده از مواد چهره گوناگون مورد بررسی قرار گرفت. مدل های تحلیلی در این مطالعه برای پیش بینی قدرت فروپاشی فشاری و مدول یانگ ساختارهای ساندویچ استفاده شد. پیش بینی های نظری مدول فشردگی یانگ با نتایج آزمایشگاهی بر اساس تغییر شکل کششی رول ها موافق است. حالت های شکست ساختارهای ساندویچ توسط شکست برشی دونده و چهره در زیر بارهای فشاری خارج از لایه نشان داده شده است. رفتارهای فشرده خارج از هواپیما از ساختارهای ساندویچ نشان دهنده قابلیت جذب انرژی است که یک عامل مهم برای ایمنی ساخت و ساز چوبی است. رفتارهای خمشی ساختارهای ساندویچ نشان می دهد که بازتاب دادن گره ها به ساختارهای ساندویچ کشنده است و خواص خمشی ساختارهای ساندویچ بستگی به چقرمگی شکست چسب و قدرت مواد چهره ای مورد استفاده در ساخت آنها دارد. .
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
In an effort to optimal the structure of wood engineering materials, wood-based two-dimensional lattice truss core sandwich structures made of wood composites and birch dowels were manufactured using a simple slotting and adhesive bonding approach. The out-of-plane compressive and bending behaviours of sandwich structures made of different facesheet materials were investigated. Analytical models were employed in this study to predict the compressive collapse strength and Young's modulus of the sandwich structures. The theoretical predictions of the compressive Young's modulus are in good agreement with experimental results based on the elastic deformation of the dowels. The failure modes of the sandwich structures are represented by the shear failure of the dowels and facesheets under out-of-plane compressive loads. The out-of-plane compressive behaviours of the sandwich structures demonstrate a good energy absorption capability which is an important factor for the safety of wooden construction. The bending behaviours of the sandwich structures indicate that the debonding of nodes was fatal to the sandwich structures, and the bending properties of the sandwich structures were found to depend on the fracture toughness of the adhesive and the strength of the facesheet materials used in their construction.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 124, June 2015, Pages 337-344
نویسندگان
, , ,