کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6708453 502946 2014 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
The effect of filament winding mosaic pattern on the stress state of filament wound composite flywheel disk
ترجمه فارسی عنوان
اثر الگوی موزاییک سیم پیچ رشته بر روی وضعیت تنش رانشی دیسک فلاپی چرخ کامپوزیت
کلمات کلیدی
دیسک چرخ فلکچر کامپوزیت الگوی سیم پیچ رشته، تجزیه و تحلیل عنصر محدود، واحد موزائیک،
ترجمه چکیده
یک دیسک کامپوزیت رشته زنجیری رشته ای با استفاده از پیکربندی الگوی موزاییک تولید شده در طول روند سیم پیچ رشته ها مشخص می شود. در این ساختار، هر یک از لایه های زخمی که به صورت مارپیچی تشکیل شده اند، شامل واحدهای شکل مثلثی منحنی متناوب در جهت شعاعی و محوری می باشد. پوسته کامپوزیت زخم رشته معمولا بر اساس اجرای مکانیک ورقه های کامپوزیتی تجزیه و تحلیل می شود. معمولا، پیکربندی الگوی موزاییک در روش های تجزیه و تحلیل کلی تنش بر اساس مدل سازی متعارف ساختارهای کامپوزیتی لمینیت، از جمله موجود در بسته های تجزیه و تحلیل عناصر محدود، در نظر گرفته نمی شود. با این حال، الگوی الگوی سیم پیچ الگوی لایه کامپوزیتی می تواند به طور قابل توجهی بر روی زمینه استرس ناشی از بارگذاری چرخشی ایجاد شود. در این مقاله نتایج مدل سازی عناصر محدود و تجزیه و تحلیل تنش از یک دیسک کامپوزیت روتاری زخم رشته با انواع مختلف الگوی سیم پیچ الماس ارائه شده است. دیسک نیز مدل شده و با استفاده از روش معمولی تجزیه و تحلیل شده است و تفاوت در مقادیر تنش پیش بینی شده از هر دو روش از طریق توزیع استرس نشان داده شده است. همانطور که نشان داده شده است، سطح تنش در دیسک چرخش کامپوزیت زخم رشته نازک توسط تجزیه و تحلیل ساختاری بر اساس مکانیک متداول سازه های لمینیت، قابل دست کم است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
A filament wound spinning composite disk is characterised by the mosaic pattern configuration produced during the filament winding process. In this structure, each helically wound layer consists of curved triangular shaped units alternating in the radial and circumferential directions. Filament wound composite shells are usually analysed based on the implementation of mechanics of composite laminates. Usually, the mosaic pattern configuration is not considered in the general stress analysis procedures based on the conventional modelling of laminated composite structures, including those available in finite element analysis packages. However, the filament winding mosaic pattern of the composite layer could significantly affect the stress field developed due to rotational loading. This paper presents results of the finite element modelling and stress analysis of a filament wound spinning composite disk with different types of filament winding mosaic pattern. The disk has also been modelled and analysed using conventional method and differences in the predicted stress values from both techniques are demonstrated through stress distributions. As illustrated, the level of stresses in the thin filament wound composite flywheel disk could be underestimated by the structural analysis based on conventional mechanics of laminated structures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 107, January 2014, Pages 260-275
نویسندگان
, , ,