کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6728369 | 1428924 | 2018 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaluation of a feedback control method for hydronic heating systems based on indoor temperature measurements
ترجمه فارسی عنوان
ارزیابی روش کنترل بازخورد برای سیستم های گرمایش هیدرولیک بر اساس اندازه گیری دمای داخلی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
درجه حرارت داخلی در بلوک های آپارتمان اغلب به طور غیرمستقیم توسط دمای هوای خارجی با استفاده از یک حلقه کنترل فیدر کنترل می شود، که در آن دمای عرضه ی رادیاتور عملکرد دما در فضای باز است. با این وجود، این اصل کنترل نمیتواند هزینههای گرمازدگی یا تلفات ناشی از مستاجران، وسایل الکتریکی، خورشید، نشت هوا و غیره را در نظر بگیرد، که ممکن است در دمای محیط ناخوشایند، گرمای بیش از حد، هوای آزاد و افزایش مصرف انرژی ایجاد شود. این می تواند تا حدی با استفاده از شیرهای ترموستاتیک بر روی هر رادیاتور حل شود. یک شرکت مسکن شهری در سوئد که از اندازه گیری و صدور صورتحساب شخصی (آی بی ام) استفاده می کند هزینه های گرمایش فضایی براساس اندازه گیری دمای داخلی در تمام اتاق های هر آپارتمان مورد مطالعه قرار گرفته است. این مقاله پروژه ای را ارائه می دهد که در آن این اندازه گیری ها برای کنترل بازخورد استفاده می شود. هدف از این مطالعه ارزیابی اصل است که بر اساس استفاده از دمای واقعی داخلی است. کنترل اصطکاک موجود در سیستم گرمایشی با شیرهای ترموستات با اصلاح درجه حرارت تغذیه افزایش یافت. مقدار اصلاح متناسب با تفاوت میانگین دمای واقعی آپارتمان و دمای نقطه تنظیم بود. کنترل پیشرفته منجر به ایجاد دمای ثابت در محیط داخلی شد، یعنی کمتر وابسته به درجه حرارت در فضای باز است. نتایج حاصل از این نتیجه گیری می کند که روش ارزیابی امیدوار کننده در ساختمان های چند خانواده است. معرفی روش کنترل پیشرفته، اگر در مقیاس وسیعتر اجرا شود، تجربه ارزشمند و آگاهی از عوامل تأثیرگذار را فراهم میآورد.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
Indoor temperatures in apartment blocks are often indirectly controlled by the outdoor temperature using a feedforward control loop, in which the radiator supply temperature is a function of the outdoor temperature. However, this control principle cannot take into account heat gains or losses caused by tenants, electrical appliances, the sun, air leakage, etc., which may result in uneven indoor temperatures, overheating, airing and increased energy use. This can be partly addressed by using thermostatic valves on each radiator. A municipal housing company in Sweden that uses individual metering and billing (IBM) of space heating costs based on measurements of indoor temperatures in all rooms of each apartment has been studied. This article presents and evaluates a project in which these measurements were used for feedback control. The aim of the study was to evaluate the principle which is based on using the actual indoor temperatures. An existing feedforward control of the heating system with thermostatic valves was enhanced by a correction of the supply temperature. The magnitude of the correction was proportional to the difference between the actual mean indoor temperature of the apartments and the set-point temperature. The enhanced control resulted in more constant indoor temperatures, i.e. they were less dependent on the outdoor temperature. The results support the conclusion that the evaluated method would be promising to apply in multi-family buildings. The introduction of the enhanced control method provided valuable experience and awareness of influencing factors if it were to be implemented on a larger scale.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy and Buildings - Volume 166, 1 May 2018, Pages 23-34
Journal: Energy and Buildings - Volume 166, 1 May 2018, Pages 23-34
نویسندگان
Mats Dahlblom, Birgitta Nordquist, Lars Jensen,