کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6750506 1430683 2018 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Development of a new partially restrained energy dissipater: Experimental and numerical analyses
ترجمه فارسی عنوان
توسعه ی جدیدی از انرژی ناشی از محدودیت انرژی: تجزیه و تحلیل تجربی و عددی
کلمات کلیدی
متخصصان انرژی، بخشی از محدودیت، رفتار هیسترتیک، الگوی تغییر شکل خستگی کم چرخه،
ترجمه چکیده
توزیع کننده های انرژی که در ساختارها ساخته شده اند، نقش مهم فیوز را در تمرکز آسیب و حفاظت از ساختار اولیه بازی می کنند. رفتارهای پایدار هیسترتیک، ساخت آسان و هزینه کم، انتظار می رود که ویژگی های سازندگان با کارایی بالا را داشته باشند. محققان قبلا مطالعه شده در معرض آسیب هایی مانند ضعف دشوار، ظرفیت کم هیسترتی و کم بودن مصرف مواد بوده اند. در این مقاله، یک تریستور انرژی جزئی که به طور جزئی محدود شده بود شامل یک هسته داخلی داخلی و یک لوله بیرونی جزئی است. نوار هسته داخلی در امتداد جهت طولی نوار مغناطیسی خرد شده است، از اجتناب از اثرات نامطلوب جوشکاری و جوشکاری و بهبود استفاده از مواد. مطالعات پارامتری بر روی متغیرهای هندسی به منظور بررسی رفتارهای خستگی چرخه کم و الگوهای تغییر شکل داده شده از توزیع کنندگان پیشنهاد شده به طور جزئی محدود شده انرژی انجام شده است. نتایج آزمایش نشان داد که اندازنده های انرژی اندکی محکم نشان داد عملکرد هیسترتیک پایدار، و هیچ انقباض موضعی یا کلی مشاهده نشد. دستورالعمل های طراحی در مورد جلوگیری از پیچش پیچشی، کنترل بخش گسترش و جلوگیری از شکست محلی بخش انتقالی ایجاد شده است. پاسخ های خمشی، شرایط تماس و تغییر شکل پلاستیک با استفاده از مدل های عددی معتبر مورد تجزیه و تحلیل قرار گرفت.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Energy dissipaters constructed in structures play an important fuse-type role in concentrating damage and protecting the primary structure. A stable hysteretic behavior, easy fabrication and a low cost are expected characteristics of high-performance energy dissipaters. Previously studied energy dissipaters have disadvantages such as difficult grouting, insufficiently hysteretic capacity and low material utilization. In this paper, a new partially restrained energy dissipater consisting of an inner core bar and an outer partially restraining tube was developed. The inner core bar is milled along the longitudinal direction of the core bar, avoiding the adverse effects of grouting and welding and improving the utilization of the material. Parametric studies on geometrical variables were performed to investigate the low-cycle fatigue behaviors and deformation patterns of the proposed partially restrained energy dissipaters. Test results showed that the partially restrained energy dissipaters demonstrated stable hysteretic performance, and no local or overall buckling was observed. Design guidelines concerning the prevention of torsion buckling, control of section expansion and avoidance of local failure of the transitional segment were developed. The buckling responses, contact conditions and plastic deformations were analyzed via validated numerical models.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 147, August 2018, Pages 367-379
نویسندگان
, , ,