کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6751288 | 1430691 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Q690 high strength steel T-stub tensile behavior: Experimental research and theoretical analysis
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Q690 high strength steel T-stub tensile behavior: Experimental research and theoretical analysis Q690 high strength steel T-stub tensile behavior: Experimental research and theoretical analysis](/preview/png/6751288.png)
چکیده انگلیسی
An experimental study on tensile behavior of welded T-stub joint with high strength steel (HSS) under monotonic tensile load was conducted. This experiment program includes twelve welded T-stub joints with different parameters, namely, the bolt diameter, strength grades, bolt distance from the web, bolt edge distance and stiffener. Plastic bearing capacity and initial stiffness of the joints with the different parameters were determined and analyzed, and the results were further validated against the plastic bearing capacity and the initial stiffness formulas in the EC3 Part 1-8. It was found that the plastic bearing capacity and the initial stiffness of welded T-stub joint increases significantly with the increasing bolt diameter, while both of them decreases remarkably as the bolt distance from the web increases. The formulas in EC3 Part 1-8 for plastic bearing capacity and identifying the failure modes are applicable to the welded T-stub joints using HSS. However, the initial stiffness of the joint is overestimated by EC3 Part 1-8. Therefore, a simplified analytical approach considering the bending deformation of bolt is developed, and the average ratio of predicted values to experimental values for the initial stiffness is 1.1.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 139, December 2017, Pages 473-483
Journal: Journal of Constructional Steel Research - Volume 139, December 2017, Pages 473-483
نویسندگان
Hongchao Guo, Gang Liang, YanLong Li, Yunhe Liu,