کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6752892 1430804 2018 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Reduction of vibration and acoustic noise in permanent magnet synchronous motor by optimizing magnetic forces
ترجمه فارسی عنوان
کاهش نویز ارتعاشی و صوتی در موتور همزمان موتور مغناطیسی با بهینه سازی نیروهای مغناطیسی
ترجمه چکیده
در این مقاله دو روش شناخته شده برای کاهش ارتعاش الکترومغناطیسی و نویز موتور هماهنگ مغناطیسی دائمی ارائه شده است. یک مدل چند فیزیک برای پیش بینی ارتعاش و نویز ابتدا ساخته شده است. آزمایش های تجربی برای اعتبارسنجی مدل انجام می شود. سپس منبع سر و صدای ارتعاش و سر و صدا از نتایج محاسبه شده و آزمایش شده است. دو روش برای کاهش این منبع پیشنهاد شده است. یکی از آن ها کاهش دامنه آن از طریق تنظیم عرض شکاف و شکل آهنربا است. دیگر این است که با تغییر فاز هارمونیک نیروی خاص در امتداد جهت محوری از طریق نویز مغناطیسی گام به گام یا مداوم. زاویه بهینه از لحاظ تحلیلی مشتق شده است. بر اساس مدل چند فازی معتبر، بهینه سازی در روش های مختلف مقایسه می شود. مشخص شده است که با کاهش هارمونیک فضای کم نیروی شعاعی کاهش قابل توجهی از نویز می تواند حاصل شود. به طور خاص، برای کاهش نویز در یک باند فرکانس وسیع، تقسیم مغناطیسی یک راه حل بهتر از بهینه سازی شاتر باز و شکل آهنربا است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Two methodologies are proposed in this paper to reduce electromagnetic vibration and noise of permanent magnet synchronous motor. A multiphysics model is firstly established to predict the vibration and noise. Experimental tests are conducted to validate the model. Then, the source of the vibration and noise peaks from calculated and tested results is located. Two methodologies are proposed to mitigate this source. One is by reducing its amplitude through adjusting slot opening width and magnet shape. The other is by changing the phase of the specific force harmonic along the axial direction through stepwise or continuous magnet skewing. The optimum skewing angle is analytically derived. Based on the validated multiphysics model, optimizations under different methods are compared. It is found that considerable reductions of noise can be achieved by reducing low space harmonics of radial force. In particular, to reduce the noise over a wide frequency band, magnet skewing is a better solution than optimizing slot opening width and magnet shape.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Sound and Vibration - Volume 429, 1 September 2018, Pages 193-205
نویسندگان
, , , ,