کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6753056 | 1430808 | 2018 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improving the performance of auto-parametric pendulum absorbers by means of a flexural beam
ترجمه فارسی عنوان
بهبود عملکرد جذب های پدال پارامتری با استفاده از یک پرتو خمشی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آونگ فشرده، خودکار پارامتری جذب، رزونانس داخلی یک تا سه، ادامهی عددی،
ترجمه چکیده
جذب خودکار پدال به خوبی در محدوده بسیار محدودی از دامنه تحریک خوب عمل می کند، که بالاتر از آن، کارایی آنها به طور ناگهانی به علت اثرات جانبی یا ظهور پاسخ های نیمه دوره ای و هرج و مرج خواهد بود. برای بهبود عملکرد در برابر این نقص، پاندول سفت و سخت در مطالعه حاضر با یک پرتو ویسکولاستیک کم سفتی جایگزین شده است. یک رزونانس داخلی یک تا سه بین حالتهای تقریبا غیر خمشی چرخشی و اول خمشی پرتو نیز وجود دارد. با کمک این تشدید درونی، انرژی که به دلیل جذب داخلی به یک دوجنس داخلی منتقل می شود از انتقال آن به سیستم اولیه با تخلیه سریع تر ارتعاش در حالت فرکانس بالاتر جلوگیری می شود منجر به کاهش اثرات اسپیلوئر می شود. برای اهداف مدل سازی، قاب ردیابی با محدودیت سختی بدن و همچنین تئوری پرتوهای غیرخطی درجه سوم به حساب آوردن زاویه چرخش به طور دلخواه بزرگ همراه با تغییرات ضخامت الاستیک متوسط است. روش پیش فرض حالت نیز برای به دست آوردن معادلات دیفرانسیل حرکت استفاده می شود. ادامه عددی راه حل دوره ای انجام می شود و بیبارکاها با تأثیرات مضر بر عملکرد تعیین می شوند. مطالعات مختلف پارامتری نیز انجام می شود که نشان می دهد که با تنظیم مناسب پارامترهای سیستم، راندمان بالاتر در محدوده وسیع تر دامنه های تحریک می تواند به دست آید.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
Auto-parametric pendulum absorbers perform well only in a very limited range of excitation amplitudes, above which their efficiency would be substantially degraded as a consequence of spillover effects or appearance of quasi-periodic and chaotic responses. For improving the performance against this drawback, the rigid pendulum is replaced in the present study with a low-stiffness viscoelastic beam. An additional one-to-three internal resonance between the almost non-flexural rotational and the first flexural modes of the beam is also introduced. With the aid of this internal resonance, the energy that has been transferred to the absorber due to the one-to-two internal resonance would be avoided from being transferred back to the primary system by faster dissipation of vibrations at a higher-frequency mode thereby leading to lower spillover effects. For modeling purpose, the tracking frame with the rigid-body constraint and also the third-order nonlinear beam theory are employed to account for arbitrarily large rotation angles coupled to moderately large elastic deformations. The assumed-mode method is also used to obtain discretized equations of motion. The numerical continuation of periodic solution is performed and the bifurcations with detrimental effects on the performance are determined. Various parametric studies are also conducted which show that by proper setting of the system parameters, higher efficiencies at much wider range of excitation amplitudes could be achieved.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Sound and Vibration - Volume 425, 7 July 2018, Pages 102-123
Journal: Journal of Sound and Vibration - Volume 425, 7 July 2018, Pages 102-123
نویسندگان
S. Mahmoudkhani,