کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6753848 1430816 2018 17 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Sound attenuation and absorption by anisotropic fibrous materials: Theoretical and experimental study
ترجمه فارسی عنوان
ضعیف شدن و جذب صدا توسط مواد فیبر دار آنی استروپیک: مطالعه نظری و تجربی
کلمات کلیدی
مواد ضدعفونی فیبر، تضعیف صدا، جذب صدا، اثر انعطاف پذیر جریان،
ترجمه چکیده
در این مقاله، مطالعات تحلیلی و تجربی انجام شده برای بررسی خصوصیات جذب و جذب مواد غیر آستروپیک فیبری مقاوم در برابر تماس با یک جریان متوسط ​​واحد انجام شده است. هدف این است که بینش هایی را برای توسعه درمان های دیوار درمان واکنش غیر موضعی داشته باشیم که بتواند سر و صدایی ناشی از تحریکات صوتی را در داخل کانال ها یا سیستم های پوشش خارجی ایجاد کند. یک مدل انتشار صوتی در لایه های واکنش دهنده واکنش دهنده انحنای بیرونی ارائه شده است که به طور کامل برای تلفات ناشی از گرما، هدایت گرما، تخلیه چسبندگی و انتشار در امتداد و در میان الیاف مواد و همچنین اثر کنترلی جریان خارجی آن را حساب می کند. ثابت بارندگی برای حداقل حالت ضعیف سیستم متصل شده با استفاده از روش جستجوی آنیلینگ شبیه سازی شده به دست می آید. پیش بینی عملکرد آکوستیک در مورد جریان بدون جریان برای طیف گسترده ای از قطر فیبر اعتبار دارد. آنها در برابر لوله های امپدانس و اندازه گیری های سرعت فشار آزاد در زمینه ضریب جذب برابری طبیعی و امپدانس سطح مورد ارزیابی قرار می گیرند. سپس مطالعات پارامتری برای تعیین پارامترهای اصلی سازنده مانند جهت گیری فیبر یا مقدار آنیزوتروپیک که عمدتا تحت تأثیر آسیب محوری یا جذب طبیعی هستند، انجام می شود. آنها با تقریب کم فرکانس به محو محوری تحت جریان کم سرعت پشتیبانی می شوند.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
This paper describes analytical and experimental studies carried out to examine the attenuation and absorption properties of rigidly-backed fibrous anisotropic materials in contact with a uniform mean flow. The aim is to provide insights for the development of non-locally reacting wall-treatments able to dissipate the noise induced by acoustic excitations over in-duct or external lining systems. A model of sound propagation in anisotropic bulk-reacting liners is presented that fully accounts for anisotropic losses due to heat conduction, viscous dissipation and diffusion processes along and across the material fibres as well as for the convective effect of an external flow. The propagation constant for the least attenuated mode of the coupled system is obtained using a simulated annealing search method. The predicted acoustical performance is validated in the no-flow case for a wide range of fibre diameters. They are assessed against impedance tube and free-field pressure-velocity measurements of the normal incidence absorption coefficient and surface impedance. Parametric studies are then conducted to determine the key constitutive parameters such as the fibres orientation or the amount of anisotropy that mostly influence the axial attenuation or the normal absorption. They are supported by a low-frequency approximation to the axial attenuation under a low-speed flow.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Sound and Vibration - Volume 417, 17 March 2018, Pages 165-181
نویسندگان
, ,