کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6758308 | 1431268 | 2018 | 24 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
NDT-based design of joint material for the detection of bonding defects by infrared thermography
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Non Destructive Testing (NDT) by active InfraRed Thermography (IRT) of bonded Carbon Fibers Reinforced Plastic (CFRP) laminates is a very challenging issue. Difficulties come from the weak contrast between the thermal properties of constitutive parts, the small thickness of the epoxy joint and also the depth of the bonded interface. The strategy considered in this work is to design a new joint material specially adapted to the NDT detection of bonding defects. Using a numerical model, it is suggested to reinforce the epoxy joint material with conductive boron nitride particles. Experimental investigation of defective assemblies confirms the interest of such approach through a clear improvement of the IRT defect detection capacity.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: NDT & E International - Volume 93, January 2018, Pages 157-163
Journal: NDT & E International - Volume 93, January 2018, Pages 157-163
نویسندگان
M. Barus, H. Welemane, V. Nassiet, M.L. Pastor, A. Cantarel, F. Collombet, L. Crouzeix, Y.H. Grunevald,