کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6777079 | 1432061 | 2018 | 15 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Validation of the material point method for the simulation of thin-walled tubes under lateral compression
ترجمه فارسی عنوان
اعتبار روش نقطه مواد برای شبیه سازی لوله های نازک دیواره تحت فشرده سازی جانبی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
لوله های نازک دیواره، روش نقطه مواد بارگیری نیمه استاتیک، بارگذاری ضربه، پخش امواج،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
This paper evaluates the performance of the material point method for the simulation of thin-walled tubes under lateral compression. Validation is carried out against actual experimental results for three different scenarios, namely: quasi-static loading, impact on rigid target, and wave propagation. A systematic approach is taken to gain insight on the trade-off between accuracy and computational cost at different levels of refinement of the model. Accuracy is assessed by comparing simulation results against experimental data. Computational cost is measured by the simulation runtime, or more specifically, in terms of the ratio between simulation time and execution time. Results indicate that, from highest influence to lowest, the factors affecting accuracy are: grid resolution, particle count along the thickness of the tube, and particle count along the circumference of the tube. Overall, it is demonstrated that the MPM is a reliable and accurate method to model circular thin-walled tubes under various excitation conditions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin-Walled Structures - Volume 130, September 2018, Pages 32-46
Journal: Thin-Walled Structures - Volume 130, September 2018, Pages 32-46
نویسندگان
Sina Sinaie, Tuan Duc Ngo, Vinh Phu Nguyen, Timon Rabczuk,