کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6778160 | 1432067 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Testing and design of cold-formed steel clip angles in tension: Pull-over and serviceability
ترجمه فارسی عنوان
تست و طراحی کمان فولاد شکل گرفته در زاویه در تنش: کشیدن و قابلیت کار
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
زاویه فولاد سرد شده، عضو تنش، طراحی سازه، تحقیقات تجربی، ارتباط،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
A cold-formed steel (CFS) clip angle is a common connector used in CFS building structures. This research project was conducted to investigate the behavior of the CFS clip angles in tension and to develop the corresponding design methods. The test program included two phases of testing: Phase I of program focused on the pull-over strength of screw connections on the anchored leg of the clip angles, and Phase II of program concentrated on the tensile strength of the anchored leg of the clip angles within the service deflection limit. Design methods for determining the nominal pull-over strength as well as the nominal tension strength of the clip angles with consideration of the serviceability were developed based on the test results. The Allowable Strength Design safety factors and the Load and Resistance Factor Design, Limit State Design resistance factors were also produced to support the proposed design methods.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin-Walled Structures - Volume 124, March 2018, Pages 13-19
Journal: Thin-Walled Structures - Volume 124, March 2018, Pages 13-19
نویسندگان
Wenying Zhang, Mahsa Mahdavian, Mohamad Yousof, Cheng Yu,