کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6876383 | 1442461 | 2018 | 21 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Decomposing complex thin-walled CAD models for hexahedral-dominant meshing
ترجمه فارسی عنوان
تجزیه مدل های پیچیده نازک دیواره ای برای مشبک شش گوشه غالب
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
شناسایی ورق نازک، تجزیه حجم اتوماتیک، مش سنگ شکن هسائوگرام، شستن استدلال هندسی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
گرافیک کامپیوتری و طراحی به کمک کامپیوتر
چکیده انگلیسی
This paper describes an automatic method for identifying thin-sheet regions (regions with large lateral dimensions relative to the thickness) for complex thin-walled components, with a view to using this information to guide the hexahedral (hex) meshing process. This fully automated method has been implemented in a commercial CAD system (Siemens NX) and is based on the interrogation and manipulation of face pairs, which are sets of opposing faces bounding potential thin-sheet regions. Careful consideration is given to the mapping, merging and intersection of face pairs to generate topologies suitable for sweep meshing the thin-sheet regions, and for treating the junctions between adjacent thin-sheet regions. It is proposed that hex meshes be applied to thin-sheet regions by quad meshing one of the faces bounding the thin-sheet region and sweeping it through the thickness to create hex elements. Decisions on the generation and positioning of the cutting surfaces required to isolate thin-sheet regions are made by considering the likely impact on the quality of the resulting mesh. The method delivers a substantial step towards automatic hex meshing for complex thin-walled geometries. A significant reduction of the degrees of freedom (DOF) can be achieved by applying anisotropic hex elements to the identified thin-sheet regions.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Computer-Aided Design - Volume 103, October 2018, Pages 118-131
Journal: Computer-Aided Design - Volume 103, October 2018, Pages 118-131
نویسندگان
Liang Sun, Christopher M. Tierney, Cecil G. Armstrong, Trevor T. Robinson,