کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6894812 1445932 2018 39 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Conditional inspection and maintenance of a system with two interacting components
ترجمه فارسی عنوان
بازرسی مشروط و نگهداری سیستم با دو جزء تعامل
ترجمه چکیده
در این مقاله بازرسی و نگهداری یک سیستم دوسویه با وابستگی تصادفی در نظر گرفته شده است. خرابی کامپوننت 1 ممکن است حالت معیوب را در قسمت 2 ایجاد کند که به نوبه خود منجر به شکست آن می شود. خرابی کامپوننت 1 و نقص در کامپوننت 2 توسط بازرسی شناسایی می شوند. مدل ما یک سیاست بازرسی شرطی را در نظر می گیرد: زمانی که جزء 1 یافت نشد، بازرسی کامپوننت 2 به وجود می آید. این سیاست بازرسی فرصتطلبانه، طبیعی است که با توجه به این وابستگی تصادفی بین اجزاء مورد استفاده قرار گیرد. هزینه طولانی مدت در واحد زمان (نرخ هزینه) سیاست بازرسی مشروط به طور کلی تعیین می شود. یک سیستم واقعی که برش میلگرد را ایجاد می کند، مدل توسعه را تحریک می کند. نمونه های عددی نشان می دهد که وقتی نسبت هزینه های جایگزینی اصلاح سیستم، یعنی عدم موفقیت، به هزینه سیستم جایگزینی سیستم پیشگیری می شود، در بیشتر موارد، یک سیاست بهینه مطلوب وجود دارد. علاوه بر این، برای سیستم مورد مطالعه که در آن بازرسی اجزای 2 گران تر نسبت به اجزای 1 است، داشتن نشانگر قابل اعتماد از وضعیت ناقص در مولفه 2 یک استراتژی خوب برای جلوگیری از خرابی های هزینه های اجزاء 2 است، به خصوص زمانی که زمان آن به شکست کوتاه.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر علوم کامپیوتر (عمومی)
چکیده انگلیسی
In this paper we consider the inspection and maintenance of a two-component system with stochastic dependence. A failure of component 1 may induce the defective state in component 2 which in turn leads to its failure. A failure of component 1 and a defect in component 2 are detected by inspection. Our model considers a conditional inspection policy: when component 1 is found to have failed, inspection of component 2 is triggered. This opportunistic inspection policy is a natural one to use given this stochastic dependence between the components. The long-run cost per unit time (cost-rate) of the conditional inspection policy is determined generally. A real system that cuts rebar mesh motivates the model development. The numerical examples reveal that when the ratio of the cost of corrective system replacement, that is on failure, to the cost of preventive system replacement is large there exists a finite optimum policy in most cases. Moreover, for the studied system wherein inspections of component 2 are expensive relative to those of component 1, having a reliable indicator of the defective state in component 2 is a good strategy to avoid costly failures of component 2, particularly when its time to failure is short.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: European Journal of Operational Research - Volume 268, Issue 2, 16 July 2018, Pages 533-544
نویسندگان
, , ,