کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6954570 | 1451831 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modeling and characterization of an electromagnetic system for the estimation of Frequency Response Function of spindle
ترجمه فارسی عنوان
مدلسازی و مشخصه یک سیستم الکترومغناطیسی برای تخمین عملکرد واکنش فرکانس اسپیندل
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نیروی الکترومغناطیسی، عملکرد واکنش فرکانس، ماشین ابزار، دینامیک اسپیندل،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی کامپیوتر
پردازش سیگنال
چکیده انگلیسی
The paper presents an electromagnetic system that has been developed to measure the quasi-static and dynamic behavior of machine-tool spindle, at different spindle speeds. This system consists in four Pulse Width Modulation amplifiers and four electromagnets to produce magnetic forces of ±190â¯N for the static mode and ±80â¯N for the dynamic mode up to 5â¯kHz. In order to measure the Frequency Response Function (FRF) of spindle, the applied force is required, which is a key issue. A dynamic force model is proposed in order to obtain the load from the measured current in the amplifiers. The model depends on the exciting frequency and on the magnetic characteristics of the system. The predicted force at high speed is validated with a specific experiment and the performance limits of the experimental device are investigated. The FRF obtained with the electromagnetic system is compared to a classical tap test measurement.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanical Systems and Signal Processing - Volume 104, 1 May 2018, Pages 294-304
Journal: Mechanical Systems and Signal Processing - Volume 104, 1 May 2018, Pages 294-304
نویسندگان
David Tlalolini, Mathieu Ritou, Clément Rabréau, Sébastien Le Loch, Benoit Furet,