کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6956186 1451866 2015 16 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fault diagnosis of reciprocating compressor valve with the method integrating acoustic emission signal and simulated valve motion
ترجمه فارسی عنوان
تشخیص خطا شیر سوپاپ با روش یکپارچه سازی سیگنال انتشار صوتی و حرکت شبیه سازی شده
کلمات کلیدی
تشخیص گسل، شیر فلکه، انتشار آکوستیک، حرکت دریچه، کمپرسور متقابل
ترجمه چکیده
در این مقاله روش تشخیص گسل ها در سوپاپی های سوپاپی سوئیچ با استفاده از سیگنال انتشار آکوستیک همراه با حرکت شبه شبیه سازی ارائه شده است. وضعیت کار واقعی شیر می تواند با تجزیه و تحلیل سیگنال انتشار آکوستیک در ناحیه زاویه میل لنگ و حرکت شبیه سازی شده توسط شبیه سازی حرکت دریچه پیش بینی شود. مکان دقیق باز و بسته شدن یک شیر معمولی که توسط حرکت شیر ​​شبیه شده ارائه شده است می تواند به عنوان مرجع برای تشخیص گسل شیر استفاده شود. گسل های معمولی شیر برای اعتبار سنجی امکان و دقت روش پیشنهادی تشخیص داده می شوند. نتایج تجربی نشان می دهد که این روش می تواند به راحتی دریچه های نرمال، دریچه های شیرین و شرایط بسته شدن شیر را تاخیر دهد. مکان های مشخصی از باز و بسته شدن دریچه های مکش و تخلیه می تواند به وضوح در شکل موج سیگنال انتشار آکوستیک و حرکت شیر ​​شبیه سازی شده مشخص شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر پردازش سیگنال
چکیده انگلیسی
This paper proposes a method of diagnosing faults in reciprocating compressor valves using the acoustic emission signal coupled with the simulated valve motion. The actual working condition of a valve can be obtained by analyzing the acoustic emission signal in the crank angle domain and the valve movement can be predicted by simulating the valve motion. The exact opening and closing locations of a normal valve, provided by the simulated valve motion, can be used as references for the valve fault diagnosis. The typical valve faults are diagnosed to validate the feasibility and accuracy of the proposed method. The experimental results indicate that this method can easily distinguish the normal valve, valve flutter and valve delayed closing conditions. The characteristic locations of the opening and closing of the suction and discharge valves can be clearly identified in the waveform of the acoustic emission signal and the simulated valve motion.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanical Systems and Signal Processing - Volumes 56–57, May 2015, Pages 197-212
نویسندگان
, , , ,