کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7003837 | 1454937 | 2018 | 25 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Initiation of sub-surface micro-cracks and white etching areas from debonding at non-metallic inclusions in wind turbine gearbox bearing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this study, a failed planetary bearing from a wind turbine gearbox was destructively examined to investigate the initiation of micro-cracks and butterflies at non-metallic inclusions, and the effect of debonding between these inclusions and the steel matrix. The butterflies were scanned using Atomic Force Microscopy (AFM) to show the topography that could not be assessed by using other microscopy techniques. Nano-indentation test was conducted across a butterfly wing and a non-metallic inclusion to measure the hardness at the interface with the steel matrix. It was found that the White Etching Areas (WEA) in the region of the butterfly wing was a damaged material that showed tearing at the debonding gap between the inclusion and steel matrix. This study highlighted the effect of debonding on the initiation of micro-cracks, WEA and inclusion cracking. A direct relationship was found between the size of inclusions and the total length of inclusions and micro-cracks or butterfly wings. The depth of the observed sub-surface damage was correlated with the sub-surface stress distribution and these results suggested that surface traction could be an important contributing factor to the subsurface damage initiation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 406â407, 15 July 2018, Pages 22-32
Journal: Wear - Volumes 406â407, 15 July 2018, Pages 22-32
نویسندگان
H.A. Al-Tameemi, H. Long, R.S. Dwyer-Joyce,