کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7003928 1454939 2018 31 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Wear performance of TiC/Fe cermet electrical discharge coatings
ترجمه فارسی عنوان
کارایی پوشش های الکتریکی تخلیه الکتریکی سیم کادمیوم / آهن را بپوشانید
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
The tribological behaviours of TiC-based cermet coatings, prepared by electrical discharge coating (EDC) using a semi-sintered TiC tool electrode, have been investigated. The as-deposited coatings exhibited complex microstructures, comprising TiC grains within an Fe matrix, on both high speed steel (HSS) and 304 stainless steel (304-SS) substrates. The wear resistance of TiC/Fe cermet coatings, on both substrate types, increased dramatically (one and two orders of magnitude improvement in specific wear rate), compared to as-polished substrates. Further, EDC cermet coatings on HSS were typically 2-4 times more wear resistant, depending on loading, than those deposited on 304-SS, with wear performance reflecting the composite nature of the coating coupled with the mechanical properties of the substrate. Laser surface treatments used to improve surface integrity of the as-deposited coatings, through elimination of cracks and porosity characteristic of ED coating, acted to increase wear rates for all samples, with the exception of coatings on HSS under conditions of high loading. The general increase of wear rate was attributed to a significant reduction in the proportion of TiC within the ED coatings, after laser treatment, combined with an increase in grain size; whilst improvements to the wear performance of laser treated, cermet coated HSS, under high loading, was attributed to the avoidance of an abrasive wear mechanism.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 402–403, 15 May 2018, Pages 109-123
نویسندگان
, , , ,