کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7003966 | 1454940 | 2018 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Comparison of wear methods at nanoscale: line scanning and area scanning
ترجمه فارسی عنوان
مقایسه روش های پوششی در نانومواد: اسکن خط و اسکن کردن منطقه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
روش بپوشید میکروسکوپ نیروی اتمی، اسکن همپوشانی، فلز مس، سیلیکون،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
Two wear methods, line scanning and area scanning, were investigated to clarify their effect on wear experimental results at nanoscale. Wear tests of pure copper against diamond tip in vacuum and silicon against SiO2 tip in water were performed using atomic force microscopy. Results show that two scanning methods can result in marked differences in experimental results for either pure mechanical wear or tribochemical wear. The variation in wear rate with sliding cycle indicates that the nanowear of material surface is a dynamic evolution process, which highly depends on the scanning methods. Line scanning is usually a simple and efficient wear method that can markedly change the interfacial contact profile and even induce a regional “work hardening” on the contact interface. By tuning the scan overlap rate, area scanning can reduce the influence of thermal drift of instrument and local defects of samples, as well as better present wear behaviors of material surface in initial wear stage. This study not only elucidates the importance of choosing wear methods as well as scan parameters in nanotribological investigations, but also provides an in-depth understanding of nanowear behaviors of material surfaces.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 400â401, 15 April 2018, Pages 137-143
Journal: Wear - Volumes 400â401, 15 April 2018, Pages 137-143
نویسندگان
Peng Zhang, Cheng Chen, Chen Xiao, Lei Chen, Linmao Qian,