کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7004231 1454972 2015 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Friction measurement method and modeling of a metallic rod sliding through a flexible polymer tube
ترجمه فارسی عنوان
روش اندازه گیری اصطکاک و مدل سازی یک میله فلزی کشویی از طریق یک لوله پلیمری قابل انعطاف
کلمات کلیدی
تندربند رسمی، بدن مرکزی کشویی، آستین ثابت فولاد ضد زنگ 316، لوله سیلیکون، لغزش اصطکاک،
ترجمه چکیده
یک تریدومتر جدید برای اندازه گیری اصطکاک لغزش بین یک آستین پلیمری قابل انعطاف قابل انعطاف و یک میله فلزی سفت و سخت که در طول آستین طولی حرکت می کند، توسعه یافته است. تریبوندم نیروهای عادی و کشش را کنترل می کند و به دقت بالا اندازه گیری می کند. نیروی کششی توسط سازگاری یک دستگاه تست کششی ارائه شده است که یک حرکت خطی دقیق کنترل شده را به تریپوپترنت کشویی منتقل می کند. اندازه گیری مستقیم نیروی عادی در رابط کاربری بین تریپوپارترها ضروری نیست، زیرا می تواند با استفاده از روش نوآورانه شبیه سازی عددی دقت بسیار بالایی داشته باشد. قبل از استفاده از آن برای یک وضعیت فیزیکی خاص، آزمایشهای متعدد تکثیر انجام شد که تقریبا کامل قابل بازیابی بود. برای تعیین ارتباط بین میزان پردازش پلاسمای حفره لوله پلیمری قابل انعطاف و ضریب اصطکاک بین لوله و فولاد ضد زنگ کشویی درون لوله سیلیکون، تری دی مودم مورد استفاده قرار گرفت. این وضعیت اغلب در ارتباط با دستگاه های زیست پزشکی درمان می شود. ضرایب اصطکاکی که از آزمایشات تعیین شده اند، کاهش یکنواختی را افزایش دادند.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی شیمی کلوئیدی و سطحی
چکیده انگلیسی
A new tribometer has been developed for the measurement of sliding friction between a stationary flexible polymeric sleeve and a rigid metallic rod that moves longitudinally within the sleeve. The tribometer enables both the normal and pull forces to be controlled and measured to high accuracy. The pull force was provided by an adaptation of a tensile testing machine which imparts a precisely controlled linear motion to the sliding tribopartner. Direct measurement of the normal force at the interface between the tribopartners is not necessary since it can be determined to very high accuracy by the innovative use of numerical simulation. Prior to its application to a specific physical situation, numerous replicate experiments were performed which demonstrated virtually perfect reproducibility. The tribometer was applied to determine the relationship between the extent of plasma processing of the bore of a flexible polymeric tube and the coefficient of friction between the tube and a stainless steel rod sliding within the silicone tube. This situation frequently arises in connection with therapeutic biomedical devices. The coefficients of friction determined from the experiments displayed a monotonic decrease as the extent of processing increased.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 338–339, 15 September 2015, Pages 418-421
نویسندگان
, , ,