Pattern recognition and signal processing of ultrasonic echo signal on two-phase flow

This paper presents a novel measurement method using ultrasonic echo signals on the flow of air–water mixtures. This method has the capability of measuring an instantaneous echo intensity profile along an ultrasonic beam, so it is expected to apply to pattern recognition of two-phase flow. Additionally, this method has an advantage compared with conventional techniques because of the clump-on type. The principle of the flow pattern recognition is based on the delay time and strength of the pulse echo. In this paper, first of all, the transmission of ultrasound through solid plates, which are made of plexiglass and carbon steel, has been investigated and the effective incidence angles for these materials were found. Then, echo signals reflected off a boundary between water and air in a vertical pipe, having a diameter of 50 mm, were obtained using an ultrasound system, and the effects estimated of a two-phase pattern, from bubbly to slug flow, on the signals. In addition, water flows down the inner surface of a pipe as annular flow, and the echo signals then also investigated.