Numerical simulation of particle size effects on contact electrification in granular systems

Based on the contact charge transfer model between two particles due to a single collision proposed by Apodaca, the contact charges carried on a particle is derived due to multiple collisions, including the repeat collisions between two particles and the collisions with different particles, in mixed-size granular system of identical material. The effect of the particle size on the charges carried on the particle is simulated. The results indicate that for a mixed-size granular system, due to multiple collisions among particles, there exists a threshold particle radius, the particles with radius higher than which and the particles with radius lower than which carry opposite charges. The threshold particle radius is equal to mean value of particle size in the mixed-size granular system. Basically, the polarity of the charges carried on the largest particle is same as the polarity of the transfer charge carrier, and in case of the positive charge transferred, the largest particle will be positively charged and the smallest particle will be negatively charged, and vice versa. In the same size region, the more dispersive the particle size is, the more the net charges can be produced. In normal-distributed granular system, the magnitude of contact charge is determined mainly by the particle size distribution, size region, total particle number and the relative impact velocity.