کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7129504 1461598 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effect of environmental dust particles on laser textured yttria-stabilized zirconia surface in humid air ambient
ترجمه فارسی عنوان
اثر ذرات گرد و غبار محیطی بر روی سطح زیرکونیا تثبیت شده با اتریتا در محیط مرطوب هوا
کلمات کلیدی
زیرکونیا، بافت لیزری، هیدروفلوئید گرد و خاک محیط زیست، چسبندگی،
ترجمه چکیده
نیترید زیرکونیوم به عنوان یک سطح انتخابی برای کاربردهای گرمای متمرکز خورشیدی استفاده می شود و یکی از روش های تشکیل نیترویید زیرکونیوم، ساختن سطح زیرکونیا توسط پرتو لیزر با شدت بالا در محیط گاز نیتروژن با فشار بالا است. بافت لیزر نیز ویژگی های سطح هیدروفوب را از طریق تشکیل ستون های میکرو / نانو در سطح فراهم می کند؛ با این حال، محو گرد و غبار گرد و غبار روی سطح بافتی به طور قابل ملاحظه ای بر ویژگی های سطح تاثیر می گذارد در مطالعه حاضر، بافت لیزر سطح زیرکونیا و اثرات ذرات گرد و خاک بر روی سطح بافت در محیط هوای مرطوب بررسی شده است. ابزار تحلیلی برای ارزیابی تغییرات مورفولوژیکی روی سطح لیزر بافت قبل و بعد از گرد و غبار گرد و غبار در محیط مرطوب محیط استفاده می شود. یافته شده است که سطح بافت لیزر دارای ویژگی های هیدروفوب است. گلدانی که در اثر مبرد شدن آب در ذرات گرد و خاک بوجود می آید، ویژگی های سطح بافت لیزر را تغییر می دهد. نیروی مماسی مورد نیاز برای حذف گل خشک از سطح بافت بالا باقی می ماند. در این حالت، محلول مایع خشک در سطح سطح بافت سطح گلدانی مسئول چسبندگی قوی گل خشک در سطح بافت است. سطح بافتی بعد از اینکه گلدان خشک از یک جت آب نمکی خارج شد، هیدرولیکی می شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی برق و الکترونیک
چکیده انگلیسی
Zirconium nitride is used as a selective surface for concentrated solar heating applications and one of the methods to form a zirconium nitride is texturing of zirconia surface by a high intensity laser beam under high pressure nitrogen gas environment. Laser texturing also provides hydrophobic surface characteristics via forming micro/nano pillars at the surface; however, environmental dust settlement on textured surface influences the surface characteristics significantly. In the present study, laser texturing of zirconia surface and effects of the dust particles on the textured surface in a humid air ambient are investigated. Analytical tools are used to assess the morphological changes on the laser textured surface prior and after the dust settlement in the humid air ambient. It is found that laser textured surface has hydrophobic characteristics. The mud formed during condensate of water on the dust particles alters the characteristics of the laser textured surface. The tangential force required to remove the dry mud from the textured surface remains high; in which case, the dried liquid solution at the mud-textured surface interface is responsible for the strong adhesion of the dry mud on the textured surface. The textured surface becomes hydrophilic after the dry mud was removed from the surface by a desalinated water jet.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics & Laser Technology - Volume 101, May 2018, Pages 388-396
نویسندگان
, , , , ,