An experimental investigation of underwater pulsed laser forming

Laser forming is a new forming technology, which deforms a metal sheet using laser-induced thermal stresses. This paper presents an experimental investigation of pulsed laser forming of stainless steel in water and air. The effects of cooling conditions on bending angle and morphology of the heat affected zone (HAZ) are studied. It is shown that the case of the top surface in air and the bottom surface immersed in water has the greatest bending angle based on the forming mechanism of TGM. The water layer above the sample decreases the coupling energy, leading to a small bending angle. For a thin water thickness (1 mm), the water effects on the HAZ are limited. As water layer thickness increases (5 mm), the concave shape of the HAZ is more remarkable and irregular because the shock waves by high laser energy heating water are fully developed. However, the area and the depth of the HAZ become less significant when water thickness is 10 mm due to the long pathway that laser undergoes.