کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7133417 1461821 2018 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Design and fabrication of thin-walled reservoir based on microcasting assisted by vacuum for neutral argon plasma system in minimally invasive medical devices
ترجمه فارسی عنوان
طراحی و ساخت مخزن نازک دیواره بر اساس میکرواستازی با کمک خلاء برای سیستم پلاسمای آرگون خنثی در دستگاه های پزشکی مهاجم تهاجمی
کلمات کلیدی
درمان پلاسمایی آرگون، تجهیزات پزشکی، ریخته گری سرمایه گذاری، نازک دیواره های دیواره،
موضوعات مرتبط
مهندسی و علوم پایه شیمی الکتروشیمی
چکیده انگلیسی
This paper presents a solution to implement neutral argon plasma (NAP) in minimally invasive medical devices for therapeutic endoscopy. The NAP system is composed of compressed inert gas (argon), two electrodes, and a high-voltage source to ionise the argon. The miniaturisation of an argon reservoir is required. Finite-element method simulations of small reservoirs of an aluminium alloy with thicknesses of 0.2, 0.4, and 0.6 mm at a pressure of 7 atm were performed. The numerical results show total deformation of 108 μm, stress of 160 MPa, and a safety factor of 1.8 for the thinnest argon reservoir, resulting in a component with no permanent deformation. A small reservoir was formed via vacuum-assisted microcasting. The prototype exhibited a small and thin-walled argon reservoir.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 279, 15 August 2018, Pages 216-222
نویسندگان
, , , ,