کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7134478 | 1461853 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Carbon based resistive strain gauge sensor fabricated on titanium using micro-dispensing direct write technology
ترجمه فارسی عنوان
سنسور کشش مقاومت کربن بر روی تیتانیوم با استفاده از تکنولوژی ارسال مستقیم میکرو پراکنش ساخته شده است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
چکیده انگلیسی
Carbon based resistive strain gauge sensor suitable for medical implant technology has been directly fabricated on a titanium test-plate using Micro-Dispensing Direct Write (MDDW) technology. A 3.5 μm biocompatible dielectric layer of parylene C was initially coated on the titanium test-plate. Commercially available screen-print carbon conductive paste was deposited on the parylene C and cured at 80 °C for 3 h; this was to ensure the physical properties and chemical integrity of the parylene C layer was maintained, whilst meeting the electrical conductivity curing requirements for the carbon tracks. The novel integrated strain sensor was experimentally tested and found to have a gauge factor of 10 making it approximately 5 times more sensitive than a commercially available metal foil strain gauge glued to the same titanium plate.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 247, 15 August 2016, Pages 389-392
Journal: Sensors and Actuators A: Physical - Volume 247, 15 August 2016, Pages 389-392
نویسندگان
Li-Ju Wei, Chris H. Oxley,