کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7135453 | 1461864 | 2015 | 24 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An arc-shaped piezoelectric generator for multi-directional wind energy harvesting
ترجمه فارسی عنوان
ژنراتور پیزوالکتریک شکل قوس برای برداشتن انرژی باد چند جهته
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ارباب باد باد، جریان ناشی از ارتعاش، چند جهته دامنه وسیع سرعت باد، پرتو الاستیک قوس شکل،
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
چکیده انگلیسی
In this study, a piezoelectric wind energy harvester was demonstrated, which aimed at addressing the limitations of the existing approaches including single-directional operation and narrow working wind speed range. In the harvester, an arc-shaped elastic beam, instead of conventional thin cantilever beams, was adopted to extract wind energy. Benefiting from the beam's characteristics of arc-shaped structure and elasticity, the harvester is capable of scavenging wind energy without any extra accessory and responding to multi-directional wind excitations. An analytical model was established to investigate the effects of wind direction and structural parameters on the electrical output. In test, the harvester worked efficiently with wind coming from four directions in a speed range of 2-17 m/s and produced a maximum open-circuit voltage up to 34 V. When connected to an external load of 15 kΩ, the harvester showed a peak output power of 1.73 mW at 17 m/s. In addition, 18 serial-connected commercial light-emitting diodes (LEDs) were lit up simultaneously at the wind speed of 10.5 m/s, which confirmed the practicability of the harvester.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 236, 1 December 2015, Pages 173-179
Journal: Sensors and Actuators A: Physical - Volume 236, 1 December 2015, Pages 173-179
نویسندگان
Jiangxin Zhao, Jin Yang, Zhiwei Lin, Nian Zhao, Jun Liu, Yumei Wen, Ping Li,