Dual-channel mid-infrared sensor based on tunable Fabry-Pérot filters for fluid monitoring applications

In this article, the design and application of an optical sensor for fluid monitoring based on two tunable Fabry-Pérot filters is presented. The sensor enables fluid transmission measurements in the spectral ranges from 1818 cm−1 to 1250 cm−1 and from 1250 cm−1 to 952 cm−1 at wavenumber-dependent resolutions between approximately 20 cm−1 and 33 cm−1. A novel method is proposed to ensure a correct wavenumber representation of the obtained spectra, correcting for an oblique light path in the optical system. The sensor shows high linearity and a low noise level for absorbance measurements. As an example for a fluid monitoring application, the transmission spectra of deteriorated automotive engine oil samples were measured and compared to spectra obtained with a Fourier-transform infrared spectrometer. We used partial least squares (PLS) regression to construct calibration models for the prediction of significant oil condition parameters, like oxidation, sulfation, water content and viscosity, from the obtained spectra. The values predicted from the absorption spectra show high correlation with reference values of the oil condition parameters determined in a laboratory according to appropriate standards. These results indicate that the sensor can be a useful supplementary tool for fast and cost-effective engine oil condition monitoring.