کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7150062 1462120 2012 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Electrochemical characterization of the paste carbon modified electrode with KSr2Ni0.75Nb4.25O15−δ solid in catalytic oxidation of the dipyrone
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آنالیزی یا شیمی تجزیه
پیش نمایش صفحه اول مقاله
Electrochemical characterization of the paste carbon modified electrode with KSr2Ni0.75Nb4.25O15−δ solid in catalytic oxidation of the dipyrone
چکیده انگلیسی
The electrochemical behavior of a carbon paste electrode modified (CPEM) with nickel-doped potassium strontium niobate (KSr2Ni0.75Nb4.25O15−δ) of tetragonal tungsten bronze (TTB)-type structure was investigated as a new sensor for dipyrone. The optimum conditions were found in an electrode composition (in mass) of 20% KSr2Ni0.75Nb4.25O15−δ, 65% graphite and 15% mineral oil in 0.5 mol L−1 KCl solution at pH 6.0. The electrode exhibits reversible electrochemical behavior in a wide potential range (0.1-0.7 V vs. SCE), high conductivity, and stability/durability electrode in 0.50 mol L−1 KCl solution. The estimated surface concentration was found to equal 1.08 × 10−9 mol cm−2. The oxidation of dipyrone was performed at carbon paste electrode unmodified at +0.54 V vs. SCE and carbon paste electrode modified with KSr2Ni0.75Nb4.25O15−δ at +0.45 V vs. SCE. This result shows that the nickel-doped potassium strontium niobate on electrode surface promotes the oxidation of dipyrone. The reaction can be brought about electrochemically, where the niobium(IV) is first oxidation to a niobium(IV) oxide at the electrode surface. The niobium(IV) then undergoes a catalytic reduction by the dipyrone in solution back to the niobium(III), which can then be electrochemically re-oxidized to produce an enhancement of the anodic current. The identification of the oxidation product of dipyrone was made by mass spectrometry for elucidation of response mechanism of the sensor. Anodic peak current (Ipa) vs. dipyrone concentration for amperometric method at the modified electrode was linear in the 3.5 × 10−5 and 3.1 × 10−4 mol L−1 concentration range and the detection limit was 5.1 × 10−6 mol L−1 dipyrone. At higher concentrations (>3.1 × 10−4 mol L−1), deviation from linearity occurs. Under this condition, an electrocatalytic reaction takes place and proceeds through a mechanism similar to the Michaelis-Menten model.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators B: Chemical - Volume 169, 5 July 2012, Pages 267-273
نویسندگان
, , , , , , ,