کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7153185 1462457 2017 19 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
A new model for the optimization of periodic inspection intervals with failure interaction: A case study for a turbine rotor
ترجمه فارسی عنوان
یک مدل جدید برای بهینه سازی دوره های بازرسی دوره ای با تعامل شکست: یک مطالعه مورد برای یک روتور توربین
کلمات کلیدی
فاصله بازرسی دوره ای، نگهداری، قابلیت اطمینان، بهینه سازی، عدم تعامل، روتور توربین بخار،
ترجمه چکیده
بازرسی یکی از فعالیت های مهم برای شناسایی و رفع نقص در سیستم قابل تعمیر است. بهینه سازی دوره های بازرسی نقش مهمی در هزینه نگهداری و سیستم عامل دارد. هنگامی که یک جزء نتواند، آن را تمدید و یا تعمیر. تحقیقات بازرسی دوره ای زیادی برای شکست پنهان است و در نظر گرفته شده یکی از سیاست های کامل (تجدید) و حداقل تعمیر است. در ادبیات، عدم بررسی همزمان هر دو تعمیر و نگهداری کامل و حداقل در مدل اطمینان مشاهده شده است. این مطالعه مدل جدید قابلیت اطمینان را با توجه به اصلاح حداقل و کامل همزمان با هم ارائه می دهد. همچنین هزینه کل تعمیر و نگهداری مورد انتظار ارائه شده و مدل سازی می شود تا فاصله بازرسی مطلوب را بدست آورد. مدل پیشنهادی مدل جامعتری در ارزیابی قابلیت اطمینان است و می تواند در موارد مختلف مرتبط با آن مورد استفاده قرار گیرد. این مدل به سیستم توربین بخار اعمال می شود که روتور آن را به عنوان جزء نرم می پذیرد و به عنوان جزء سخت فیلتر می کند. نتیجه نشان داد که سیستم باید هر 12 ماه بازرسی شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی کنترل و سیستم های مهندسی
چکیده انگلیسی
Inspection is one of the important activities to detect and fix failures in repairable system. Optimization of inspection intervals has critical role in maintenance cost and operating system. When a component fails, it is renewed or repaired. A great deal of periodic inspection research is for hidden failure and considered one of the perfect (renew) and minimal repair policies. In literature, the lack of simultaneous consideration of both perfect and minimal repair in reliability model has been observed. This study presents new reliability model by synchronous consideration of both minimal and perfect repair. As well as, the expected total maintenance cost is presented and modeled to figure out the optimal inspection interval. The proposed model is more comprehensive model in reliability evaluation and can be applied in different pertinent problems. The model is applied to steam turbine system which the rotor considered as soft component and filter as hard component. The result revealed that the system should be inspected every 12 month.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Case Studies in Engineering Failure Analysis - Volume 9, October 2017, Pages 148-156
نویسندگان
,