کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7154299 | 1462498 | 2016 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An approach for machining distortion measurements and evaluation of thin-walled blades with small datum
ترجمه فارسی عنوان
یک روش برای اندازه گیری های اعوجاج ماشینکاری و ارزیابی تیغه های نازک با پایه کوچک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سطح آزاد، اعوجاج ماشینکاری، تست نوری، قطعه نازک دیواره، تیغه توربین،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی هوافضا
چکیده انگلیسی
Inspection techniques for aero-engine blades are a hot topic in industry. Since these blades have a sculptured surface and a small datum, measurement results may deviate from an actual position. There are few proper approaches compensating for non-uniform distribution errors that are within specified tolerance ranges. This study aimed to develop a meshing structure measuring approach for the distortion of blades via non-contact optical 3D scanning. A rough measurement and a registration procedure are initially adopted to rectify the coordinate system of a blade, which avoids the initial coordinate system errors caused by the small datum. A measurement path with meshing structure is then unfolded on the blade surface. For non-uniform distribution errors, the meshing structure measurement is more visual and clear than the traditional constant height curves method. All measuring points take only 7Â min to complete, and the distribution of error is directly and accurately presented by the meshing structure. This study provides a basis for future research on distortion control and error compensation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chinese Journal of Aeronautics - Volume 29, Issue 6, December 2016, Pages 1806-1814
Journal: Chinese Journal of Aeronautics - Volume 29, Issue 6, December 2016, Pages 1806-1814
نویسندگان
Yu Jianhua, Chen Zhitong, Jiang Zepeng,