کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7168818 | 1463033 | 2018 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An experimental-finite element method based on beach marks to determine fatigue crack growth rate in thick plates with varying stress states
ترجمه فارسی عنوان
یک روش عنصر تجربی محدود که براساس علامت های ساحلی برای تعیین نرخ رشد خستگی در صفحات ضخیم با شرایط مختلف استرس است
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سرعت رشد خستگی، دولت استرس، جلو چپ عامل محدودیت،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The relation between the fatigue crack growth rate and stress state is significant for fatigue life estimation, especially for thick-welded structures with complex stress states. This paper proposes a hybrid Experimental-Finite Element Method aimed to obtain the fatigue crack growth rate corresponding to plane stress and plane strain states. A static load marking method is proposed to mark a series of crack fronts in a single edge notched bending specimen at known numbers of cycles, which is analysed by nonlinear finite element method to evaluate the stress state by a local constraint factor. Stress intensity factor at the center of the thickness and the surface position where plane strain and plane stress states approximately exist and remain unchanged with crack propagation, is calculated by the 1/4-node displacement method with consideration of non-orthogonal mesh influence. The J-integral method and the virtual crack closure technique are also applied to check the performance of the methods in dealing with the actual cracked body problem. Crack length increments are determined based on the crack front profiles. The da/dN-ÎK curves of plane strain and plane stress states are determined and compared with the results from normal fatigue crack growth rate tests according to Chinese standard: GB/T 6398-2000. The fatigue crack growth behavior of a semi-elliptical surface crack located at the weld toe of a T-plate welded joint subjected to cyclic tension loading is assessed based on the curves and the analytical results are compared with the experimental results. The asymptotic crack shape observed in experiments is successfully predicted by using the curves determined by the hybrid method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 196, 1 June 2018, Pages 123-141
Journal: Engineering Fracture Mechanics - Volume 196, 1 June 2018, Pages 123-141
نویسندگان
Jingxia Yue, Yan Dong, C. Guedes Soares,