کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7169670 | 1463079 | 2015 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
On the toughness measurement for ductile polymers by orthogonal cutting
ترجمه فارسی عنوان
بر روی اندازه گیری چقرمگی پلیمرهای ورقه ای با برش مستطیلی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مکانیک شکستگی، چقرمگی شکستگی، پلیمرها، برش دادن،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The fracture toughness, Gc, of three commercial polymers (HDPE, PP and PEEK) has been determined using a cutting test method. The traditional linear elastic fracture mechanics tests were conducted for comparison. The results showed that the cutting analysis is capable of giving valid fracture data for ductile polymers. However, when the cut depth is small, e.g. less than 100 μm, an inverse size effect on Gc was observed in cutting, i.e. the measured toughness of the polymers tends to decrease with the decrease of the cutting depth. Possible mechanisms for such a scale effect on fracture energy are discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 149, November 2015, Pages 276-286
Journal: Engineering Fracture Mechanics - Volume 149, November 2015, Pages 276-286
نویسندگان
H. Wang, L. Chang, L. Ye, J.G. Williams,