Parameter identification of a thermodynamic model for superelastic shape memory alloys using analytical calculation of the sensitivity matrix

This paper presents an identification procedure for the parameters of a thermodynamically based constitutive model for Shape memory Alloys (SMAs). The proposed approach is a gradient-based method and utilizes an analytical computation of the sensitivity matrix. For several loading cases, including superelasticity, that are commonly utilized for the model parameters identification of such a constitutive model, a closed-form of the total infinitesimal strain is derived. The partial derivatives of this state variable are developed to find the components of the sensitivity matrix. A Levenberg-Marquardt algorithm is utilized to solve the inverse problem and find the best set of model parameters for specific SMA materials. Moreover, a pre-identification method, based on the second derivative of the total strain components is proposed. This provides a suitable initial set of model parameters, which increases the efficiency of the inverse method. The proposed approach is applied for the simultaneous identification of the non-linear constitutive parameters for two superelastic SMAs. The comparison between experimental and numerical curves obtained for different temperatures shows the capabilities of the developed identification approach. The robustness and the efficiency of the developed approach are then experimentally validated.