کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7170928 | 1463453 | 2018 | 28 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A nonlinear shear-lag model applied to chemical anchors subjected to a temperature distribution
ترجمه فارسی عنوان
مدل غیرخطی برشی-برشی به سیم پیچ های شیمیایی تحت توزیع دما اعمال می شود
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
پیچ های شیمیایی، مدل برش برشی توزیع دما، ظرفیت باربری، استرس باند، لغزش لنگر مقاوم در برابر آتش،
ترجمه چکیده
اتصالات چسب به طور فزاینده ای در پل ها و ساختمان های ساختمانی به دلیل خواص مکانیکی بالا و سهولت اجرای آنها مورد استفاده قرار می گیرند. با این حال، مکانیزم انتقال بار در مفاصل چسب پیچیده است و از سال 1938 مورد بررسی چندین قرار گرفته است. چندین مدل برای اندازه گیری توزیع استرس در امتداد مفاصل باند ایجاد شده است. با این وجود، مدل های بسیار کمی برای مطالعه توزیع تنش در پیچ های شیمیایی با توجه به اثر دما وجود دارد. این مقاله مدل غیرقطبی برشی-لگن را که با لنگرهای شیمیایی سازگار است، ارائه می دهد که می تواند پیش بینی پروفیل های توزیع تنش و مدت مقاومت آتش را برای هر توزیع دما نشان دهد. این مدل اهمیت توزیع دما بر روی مشخصات استرس را برجسته می کند. مقاله نشان می دهد که وقتی لنگر حداکثر نیروی محوری خود را می گیرد، تمام عناصر تشکیل دهنده لنگر حداکثر عملکرد خود را در یک زمان می دهند.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
Adhesive joints are increasingly used in bridges and buildings construction thanks to their high mechanical properties and their ease of implementation. However, the load transfer mechanism within adhesive joints is complex and has been the subject of several studies since 1938. Several models have been developed to quantify the stress distribution along bond joints. Nevertheless, very few models exist today to study the stress distribution in chemical anchors by taking into account the temperature effect. This paper presents a non-linear shear-lag model adapted to chemical anchors allowing predicting their stress distribution profiles and fire resistance duration for any temperature distribution. The model highlights the importance of the temperature distribution on the stress profile. The paper shows that when the anchor reaches its maximum axial force, all the elements composing the anchor provide their maximum performance at the same time.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 84, August 2018, Pages 438-450
Journal: International Journal of Adhesion and Adhesives - Volume 84, August 2018, Pages 438-450
نویسندگان
Mohamed Amine Lahouar, Nicolas Pinoteau, Jean-François Caron, Gilles Foret, Romain Mege,