کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7171129 1463483 2014 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Durability of asphalt mixtures: Effect of aggregate type and adhesion promoters
ترجمه فارسی عنوان
طول عمر مخلوط های آسفالت: اثر نوع مضر و مؤثر بودن چسبندگی
کلمات کلیدی
پوست کندن، طول عمر شکستگی، آسفالت،
ترجمه چکیده
پیاده روهای آسفالت به نفوذ آب حساس هستند، که قیر را به چسبندگی می بخشد، ترویج شکست می کند. اثرات آب در طیف وسیعی از سیستم های آسفالت با استفاده از آزمون پوستی اندازه گیری شده است. گیربکس قیری بر پایه آلومینیومی از بازوی ثابت بهم پیوسته و انرژی شکستگی تعیین شد. در شرایط خشک، شکستگی در داخل قیر مخلوط شده بود، اما عمدتا بین قیر و سنگدانه پس از غوطه ور شدن در آب، عمدتا متصل بود. اثر آب بر چسبندگی قیر به سه سنگ (سنگ آهک، سنگ مرمر و گرانیت) مورد بررسی قرار گرفت. سنگ معدن اسید (گرانیت) باعث کاهش چسبندگی بیشتر نسبت به سنگ های معدنی (سنگ آهک و سنگ مرمر) در شرایط مرطوب شد. تخلخل سنگ معدن، اگر چه نشان داده شده است قابل توجه است، کمتر از ترکیب شیمیایی آنها بود. چسبندگی مواجهه در شرایط مرطوب می تواند با مخلوط کردن پلیمر سیلان، آمین یا لاستیک به قیر تبدیل شود.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
Asphalt road-pavements are sensitive to water ingress, which degrades the bitumen to aggregate adhesion, promoting failure. The effects of water on a range of asphalt systems have been quantified using peel tests. The bitumen binder on an aluminium backing was peeled from the aggregate fixed arm and the fracture energy was determined. In dry conditions, failure was cohesive within the bitumen, but became mainly interfacial between the bitumen and aggregate after immersion in water. The effect of water on the adhesion of bitumen to three aggregates (limestone, marble and granite) was evaluated. Acidic aggregates (granite) showed a greater loss of adhesion than basic aggregates (limestone and marble) under wet conditions. The porosity of the aggregates, although shown to be significant, was less important than their chemical composition. The interfacial adhesion in wet conditions can be improved by mixing a silane, amine or rubbery polymer into the bitumen.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Adhesion and Adhesives - Volume 54, October 2014, Pages 100-111
نویسندگان
, , , ,