کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7172916 1464033 2018 26 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On shear failure behaviors of an armor steel over a large range of strain rates
ترجمه فارسی عنوان
رفتارهای شکست برش فولاد زرهی در طیف وسیعی از میزان فشار
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
A newly-designed double shear specimen (Xu et al. A novel method in dynamic shear testing of bulk materials using the traditional SHPB technique, Int. J. Impact Eng. 101: 90-104) is used in this work to study shear failure behaviors of the 603 armor steel with shear strain rate ranging from 0.001 s−1 to 45,000 s−1. Shear stress-shear strain curves are obtained at each strain rate until fracture initiates in the shear zone. It's observed that the failure strains drop abruptly while the failure stresses increase only slightly with strain rates, which means that the material tends to fail more easily at higher strain rates. With the aid of numerical simulation, it's found that in the shear zone a shear dominated stress state is formed, and the values of stress triaxiality and Lode angle parameter are quite low. Fractographic examination shows that under simple shear condition, the failure process of the material is controlled by totally different micro-mechanisms. With the increase of strain rates, the failure characteristics transform clearly from elongated dimples to adiabatic shear bands, which provide a reasonable explanation to the mechanical responses of the material. The results show that the mechanical behaviors of materials should be tested over a wide range of strain rates, and at the same time the data consistency and comparability should be kept, to set up a foundation for engineering computation and to guide the safety design.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Impact Engineering - Volume 118, August 2018, Pages 24-38
نویسندگان
, , , , ,