کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176704 | 1466731 | 2016 | 27 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Expulsion characterization of stainless steel resistance spot welding based on dynamic resistance signal
ترجمه فارسی عنوان
خصوصیات خروج از جوش نقطه مقاوم در برابر فولاد ضد زنگ بر اساس سیگنال مقاومت پویا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نقطه جوش مقاومت مقاومت پویا، اخراج، استحکام کششی برشی،
ترجمه چکیده
اثرات شرایط مختلف خروج بر مقاومت مقاومت دندانه ای و مقاومت کششی برشی جوش تحت شرایط خروجی کار در نقطه جوش مقاومتی مورد بررسی قرار گرفت. خروج ممکن است بیش از یک بار در یک جوش بر اساس تجزیه و تحلیل مقاومت پویا اتفاق می افتد. در این مورد مشخص شد مقاومت های پویای خروج شبیه هستند و مقادیر مقاومت کششی مقاومت برشی نزدیک به یکدیگر هستند و با جوش جوش افزایش می یابد اگر سطح جوش در شرایط خوبی باشد. هنگامی که سطح آلوده می شود، مقاومت مقاومت پویا و مقاومت کششی مقاومت برشی، رفتار تصادفی را نشان می دهد. رابطه بین پارامترهای خروجی، به ویژه زمان اولین خروج و تعداد خروج، و پارامترهای جوشکاری، به ویژه جوش جوش و نیروی الکترود، می تواند به عنوان یک سیگنال بازخورد برای کنترل کیفیت استفاده شود.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The effects of different expulsion conditions on the dynamic resistance and weld tensile-shear strength under shop expulsion conditions in resistance spot welding were investigated. Expulsion may occur more than once in a weld based on an analysis of the dynamic resistance. It was exposed that the expulsion dynamic resistances are similar and the tensile-shear strength values are close to each other and increasing with the welding current if the weldment surface is in good condition. When the surface is contaminated, both the dynamic resistances and the corresponding tensile-shear strength values exhibit random behavior. The relationship between expulsion parameters, specifically the first expulsion time and the number of expulsions, and welding parameters, specifically welding current and electrode force, could be used as a feedback signal for quality control.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 236, October 2016, Pages 235-240
Journal: Journal of Materials Processing Technology - Volume 236, October 2016, Pages 235-240
نویسندگان
Qiuyue Fan, Guocheng Xu, Xiaopeng Gu,