کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176926 | 1466739 | 2016 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of microstructural evolution of Al-Si coated UHSS on its tribological behaviour against tool steel at elevated temperatures
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The usage of the hot stamping process is of great importance due to the high demands for production of ultra-high strength steels (UHSS). An Al-Si coating is normally applied to the steel to prevent decarburisation and scaling during heating and to improve the corrosion resistance of the final component. During heating, the Al and the Si from the coating combine with the Fe from the steel substrate to form hard intermetallic phases. Little is known about the influence of the heating conditions on the tribological behaviour of the Al-Si coating during interaction with tool steels. The present work investigated different heat treatment parameters and the influence they had on the microstructure of the coating and the galling behaviour. With low alloying temperatures (700 °C), severe galling occurred and increasing the alloying temperature to 900 °C resulted in almost negligible material transfer. The reduction in galling was associated to the development of Fe2Al5 and FeAl2 at the surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 228, February 2016, Pages 117-124
Journal: Journal of Materials Processing Technology - Volume 228, February 2016, Pages 117-124
نویسندگان
Leonardo Pelcastre, Jens Hardell, Anthony Rolland, Braham Prakash,