کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176987 | 1466742 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of process parameters on friction stir spot welded aluminum joints by various threaded tools
ترجمه فارسی عنوان
تأثیر پارامترهای فرایند بر اتصالات آلومینیوم جوش داده شده با اصطکاک با استفاده از ابزارهای مختلف رشته
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
جوشکاری نقطه جوش اصطکاکی، آلیاژ آلومینیوم، جریان مواد، قدرت مشترک،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
The flow behavior and strength of joints created using three stirring tools, with right-handed threads at different locations on their cylindrical pins, were investigated. The threading locations on the tools significantly influenced the evolution of the stir zone in the welds and caused material intermixture in various degrees at varying plunging depths. Failure joints were observed in the welds without tool rotation. Force measurements indicated that the highest torque was found in the welds at 900Â rpm. Not much difference was observed in the axial force variation between the welds. The peak temperature was obtained at the measured point nearest to the tool shoulder. The maximum joint strength of over 6.5Â kN was obtained in the 900Â rpm weld with a 9Â s dwell time.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 347-356
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 347-356
نویسندگان
Yuan-Ching Lin, Jiun-Nan Chen,