کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176998 | 1466742 | 2015 | 30 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of bead quantity in ultrasonic shot peening: Surface analysis and numerical simulations
ترجمه فارسی عنوان
اثر مقدار مهره در شستشوی اولتراسونیک: تجزیه و تحلیل سطح و شبیه سازی عددی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
سوزش اولتراسونیک، شبیه سازی عناصر گسسته، شبیه سازی تاثیر تک، تجزیه و تحلیل سطح، استرس باقی مانده فشاری،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Ultrasonic shot peening is a cold surface treatment used to extend the fatigue life of metallic components. This process is performed in a closed chamber where spherical beads are moved by sonotrode vibration. Thousands of impacts on treated material induce compressive residual stresses, which are responsible for the lifetime improvement by holding back micro-crack propagation. The present study shows the effect of the number of beads used in the process on the treated surface. Two INCONEL 690 samples were peened with different bead quantities during a short time to obtain coverage lower than 100%. The surface analysis of the peened sample showed that the number of beads strongly affected the number of impacts and their depth distribution. Then, numerical analysis combining bead dynamic simulations by discrete elements with single impact simulations by finite elements was performed. The numerical results were in good agreement with the experimental data, which validates the present method. Thus, the effects of bead quantities on compressive residual stress were quantified. As a key result, the study showed that in the present peening configuration, an increasing number of beads concentrated the compressive residual stress onto the treated surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 413-420
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 413-420
نویسندگان
Thomas Rousseau, Thierry Hoc, Philippe Gilles, Cécile Nouguier-Lehon,