کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7196333 1468309 2017 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Brittle crack propagation behavior in a member subjected to bending load
ترجمه فارسی عنوان
رفتار تسلیم تکه ای در یک عضو تحت بار خمشی
کلمات کلیدی
شکستگی ضعیف، انتشار کراک، سختی دستگیری، روش عنصر محدود تست خم شدن،
ترجمه چکیده
شکستگی ضخیم یک شکست فاجعه آمیز است که باید برای سازه های فولادی اجتناب شود. به منظور تهیه پرونده ای که شکستگی شکستی ناشی از ترویج خستگی ناشی از نقص جوشکاری و کاهش سختی منطقه آسیب دیده و غیره رخ می دهد، مفهوم توقف انتشار تکه های شکننده در مواد پایه به مکان های مخزن و کشتی اعمال می شود. در این مقاله، هدف این است که یک روش برای به راحتی ارزیابی این مشخصه توقف ترویج تکه تکه تکه را براساس بار خمشی که می تواند کاهش بار در مقایسه با سیستم بار کششی را که عادی و گران است مقایسه کند. به ویژه تاریخ گذرا از وضعیت تنش کامل به طور کامل مورد بررسی قرار گرفته و معیار شکست مناسب برای توصیف انتشار تکه ای مورد بررسی قرار گرفته است. در نتیجه، مشخص شد که هنگامی که ترمز با سرعت بالا به بخش هایی که قبل از فشرده سازی پخش شده اند، رشته تنش در ناحیه به شدت کاهش پیدا کرده و توقف آن آسان تر می شود. به منظور بررسی جزئیات گذار زمینه تنش، نویسندگان یک مدل عنصر محدودی را ایجاد کردند که می تواند این را در نظر بگیرد و در نهایت یک روش ارزیابی جدید بر اساس بار خمشی ایجاد کرد.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
Brittle fracture is a catastrophic failure that must be avoided for steel structures. In order to prepare the case that brittle fracture occurs due to fatigue crack propagation from welding defects and toughness deterioration of heat affected zone, etc., the concept of stopping brittle crack propagation in the base material is being applied to the tank and ship fields. In this paper, the target is to develop a method to conveniently evaluate this brittle crack propagation stop characteristic, based on a bending load which can bring a dramatic decrease in load comparing tensile load system which is ordinary and expensive. Especially the transient history of stress field is evaluated thoroughly and suitable fracture criterion for description of crack propagation is investigated. As a result, it was found that when the high-speed crack propagated to the part subjected to the pre-compression, the stress field at the tip sharply dropped, and it becomes easier to stop. In order to investigate the detail of the transition of stress field, the authors constructed a finite element model that can take these into account and eventually developed a new evaluation method based on bending load.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Theoretical and Applied Fracture Mechanics - Volume 92, December 2017, Pages 266-275
نویسندگان
, , ,