کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7205873 1468628 2018 20 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermal conductivity of metal powders for powder bed additive manufacturing
ترجمه فارسی عنوان
هدایت حرارتی پودرهای فلزی برای تولید مواد افزودنی پودر
کلمات کلیدی
تولید مواد افزودنی تخت پودر، هدایت حرارتی موثر، فشار، درجه حرارت، ذوب لیزری انتخابی،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
The thermal conductivities of five metal powders for powder bed additive manufacturing (Inconel 718, 17-4 stainless steel, Inconel 625, Ti-6Al-4V, and 316L stainless steel) were measured using the transient hot wire method. These measurements were conducted with three infiltrating gases (argon, nitrogen, and helium) within a temperature range of 295-470 K and a gas pressure range of 1.4-101 kPa. The measurements of thermal conductivity indicate that the pressure and the composition of the gas have a significant influence on the effective thermal conductivity of the powder, but that the metal powder properties and temperature do not. Our measurements improve the accuracy upon which laser parameters can be optimized in order to improve thermal control of powder beds in selective laser melting processes, especially in overhanging and cellular geometries where heat dissipation by the powder is critical.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Additive Manufacturing - Volume 21, May 2018, Pages 201-208
نویسندگان
, , , , , ,