کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7211650 | 1469278 | 2017 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Resistance of a nonwoven geotextile against mechanical damage and abrasion
ترجمه فارسی عنوان
مقاومت یک ژئوتکستایل غیر آهنی در برابر آسیب مکانیکی و سایش
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
روشهای نصب (که موجب آسیب مکانیکی) و سایش می شوند، می توانند تغییرات ناخواسته در خواص ژئوتکستایل ایجاد کنند. در این کار، یک ژئوتکستایل پلی پروپیلن غیر آلی تحت آزمون سه تست تخریب قرار گرفت: (1) آسیب مکانیکی، (2) سایش و (3) آسیب مکانیکی و سپس سایش (مواجهه متوالی). آسیب های ناشی از تست های تخریب توسط آزمون های کششی، پاره شدن و استحکام پانچ مورد بررسی قرار گرفت. بر اساس تغییرات در خواص مکانیکی، عوامل کاهش دهنده تعیین می شود. نتایج نشان داد که تست های تخریب موجب کاهش معکوس در مقاومت مکانیکی ژئوتکستایل (کاهش بیشتر در مواجهه با هر دو آزمایش تخریبی) می شود. عوامل کاهش اثر متقابل آسیب مکانیکی و ساییدگی حاصل شده در مواجهه با هر دو آزمایش تخریب مختلف متفاوت بود (کمی بالاتر) نسبت به روش های سنتی (تعیین عوامل کاهش به صورت جداگانه برای هر تست تخریب و تکثیر بیشتر).
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
The installation procedures (which induce mechanical damage) and abrasion can cause unwanted changes on the properties of the geotextiles. In this work, a nonwoven polypropylene geotextile was subjected to three degradation tests: (1) mechanical damage, (2) abrasion and (3) mechanical damage followed by abrasion (successive exposure). The damage caused by the degradation tests was evaluated by tensile, tearing and static puncture tests. Based on the changes occurred in the mechanical properties, reduction factors were determined. Results showed that the degradation tests provoked relevant reductions in the mechanical strength of the geotextile (higher reductions in the successive exposure to both degradation tests). The reduction factors for the combined effect of mechanical damage and abrasion obtained in the successive exposure to both degradation tests were different (slightly higher) than those obtained by the traditional methodology (determination of reduction factors separately for each degradation test and further multiplication).
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ciência & Tecnologia dos Materiais - Volume 29, Issue 1, JanuaryâApril 2017, Pages e177-e181
Journal: Ciência & Tecnologia dos Materiais - Volume 29, Issue 1, JanuaryâApril 2017, Pages e177-e181
نویسندگان
Mónica Dias, José Ricardo Carneiro, Maria de Lurdes Lopes,