کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7211674 1469278 2017 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Mechanical properties determination of dual-phase steels using uniaxial tensile and hydraulic bulge test
ترجمه فارسی عنوان
تعیین خواص مکانیکی فولادهای دو فاز با استفاده از تست کشش یکپارچه و هیدرولیکی
کلمات کلیدی
ورق فلز تشکیل، فولاد دو مرحله ای، منحنی جریان، بیل هیدرولیکی دوجداره، عملکرد لوکوس،
ترجمه چکیده
شبیه سازی عددی از فرآیند تشکیل ورق فلز نیاز به ایجاد نتایج بسیار قابل اعتماد، که به نوبه خود نیاز به شناسایی دقیق خواص مکانیکی. در این مقاله، مطالعه ای بر انتخاب عملکرد توصیفی منحنی جریان تنش - کرنش ورق فلز ورق و نیز انتخاب بهترین لک های عملکرد بر اساس آزمون های کششی دو طرفه و هیدرولیکی بر روی دو جداره هیدرولیکی بر روی دوگانه - فولاد فاز صنعت مورد علاقه. برای به دست آوردن مشخصات بهتر از منحنی سخت شدن، ترکیب با استفاده از داده های آزمون کششی یکسانی با نتایج آزمایش هیدرولیکی هیدرولیکی ساخته شده است، از آنجایی که آزمایش بافت در مقایسه با آزمون کششی دامنه وسیعی از فشار پلاستیک را پوشش می دهد. از آنجاییکه دو منحنی جریان دارای مسیرهای مختلفی هستند، آنها نمیتوانند به طور مستقیم مقایسه یا ترکیب شوند. بنابراین لازم است تغییر منحنی تنش-فشار جریان از آزمایش بجای دو طرفه به منحنی تنش-تنش معادل داده شود. روشهای مختلفی برای تبدیل منحنی استرس دوجنسی به یک معادل آن استفاده شده و نتایج مختلف مقایسه و ارزیابی شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
Numerical simulations of sheet metal forming processes need the establishment of highly reliable results, which in turn need the accurate identification of mechanical properties. In this paper a study is presented on the choice of the characterization function of flow stress-strain curve of sheet metal materials, as well as the selection of the best yield locus, based on experimental uniaxial tensile and biaxial hydraulic bulge tests performed on dual-phase steels of industrial interest. To obtain a better characterization of the hardening curve, a combination is made using the uniaxial tensile test data with biaxial hydraulic bulge test results, since bulge test covers a larger range of plastic strain when compared to tensile test. Since the two flow curves have different strain paths, they can't be directly compared or combined. Therefore, it is necessary a transformation of flow stress-strain curve provided from biaxial bulge test into equivalent stress-strain curve. Different methodologies were applied to transform biaxial stress-strain curve to an equivalent one and the different results are compared and evaluated.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ciência & Tecnologia dos Materiais - Volume 29, Issue 1, January–April 2017, Pages e239-e243
نویسندگان
, , ,